Shanghai Saipwell Electric Co., Ltd.
Main products:Thermostat,Heater,Enclosure,Solar charge controller
Products
Contact Us
  • Contact Person : Mr. Ji Sam
  • Company Name : Shanghai Saipwell Electric Co., Ltd.
  • Tel : 0086-021-33050667,53080607-8001
  • Fax : 0086-021-33050669
  • Address : Shanghai,Shanghai,3-11 Dart Commerical Center NO.516, Wenchuan Road, Shanghai 201906, China
  • Country/Region : China
  • Zip : 201906

2012 Mechanical Themostat FZK 011

2012 Mechanical Themostat FZK 011
Product Detailed
1.2012 Mechanical Thermostat FZK 011 2,Adjustable temperature 3,Small hysteresis 4,High switching capacity 5,Clip fixing

1.2012 Mechanical Thermostat FZK 0112,Adjustable temperature3,Small hysteresis4,High switching capacity5,Clip fixing 

Mechanical Thermostat FZK 011

The mechanical thermostat is used for controlling heating and cooling equipment, filter fans or signal devices. The thermostat registers the surrounding air and can switch both inductive and resistive loads via snap-action contact.Functionality: The temperature setting on the scale equals to the upper switch point, which means that the Normally Closed contact opens. The temperature setting minus switch temperature difference (and tolerances) equals to the lower switch point, which means that the Normally Closed contact closes.

Technical Data

  

Switch temperature difference

5K (-3/+2 K tolerance)*

Sensor element

thermostatic bimetal

Contact type

change-over snap-action contact

Service life

> 100 000 cycles

Min. switching current

10 mA

Max. switching capacity, NC

250VAC, 10 (4) A

120VAC, 10 (4) A

DC 30W

Max. switching capacity, NO

250VAC, 5 (2) A

120VAC, 5 (2) A

DC 30W

Connection

4-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm², stranded wire (with wire end ferrule) 1.5mm²

Mounting

clip for 35mm DIN rail, EN60715

Casing

plastic according to UL94 V-0, light grey

Dimensions

67 x 50 x 38mm

Weight

approx. 0.1kg

Fitting position

variable

Operating/Storage temperature

-45 to +65°C (-49 to +149°F)

Operating / Storage humidity

max. 90 % RH (non-condensing)

Protection type

IP20

Approvals

UL File No. E164102

*Connecting terminal "N" (RF heating resistor) causes the thermal feedback to work and allows for a possible reduction of the switch temperature difference. Thermal feedback is subject to surrounding conditions and thus has to be determined for each individual application.

Art. No.

Operating voltage

Setting range

01170.0-00

230VAC

+5 to +60°C

01170.0-01

230VAC

+40 to 140°F

01170.0-02

230VAC

-20 to +35°C

01170.9-00

120VAC

+40 to 140°F

01170.9-01

120VAC

+5 to +60°C

Technical Drawing:

2012 Mechanical Themostat FZK 011



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.